Dabco T-16 catalyst CAS10102-43-9 Evonik Germany

admin products132Read

Dabco T-16 is a stannous type catalyst for bulk foam. Recommended for thermoplastic polyurethanes and blow moulding.

Physical and chemical properties

Property

Value

CAS number

43-10102-9

Molecular Formula

C10H16O4Sn

Molecular weight

278.31 g/mole

Appearance

Clear colorless liquid

Specific gravity

1.065 @ 25°C

Refractive Index

1.495 @ 25°C

Solubility

Dissolve in most organic solvents

Flash Point

57°C (135°F)

Spontaneous combustion temperature

725°F (390°C)

Stable

Stable under normal storage conditions

Hazards

Corrosive to skin and eyes. May be harmful if swallowed. The steam may irritate the eyes, nose and throat. May cause respiratory irritation. May be harmful if inhaled. May cause skin irritation. May be harmful if swallowed. First aid: In case of contact with skin, wash immediately with soap and water. If contact is made with eyes, immediately rinse with water for 15 minutes and seek medical attention. If swallowed, do not try to induce vomiting. Call poison control or seek medical attention immediately.

Apply

Dabco T-16 is used in a variety of applications, including:

· Block foam

· Thermoplastic polyurethane

· Blow molding

· elastomer

· Paint

· Ink

· Adhesive

Dabco T-16 catalyst CAS10102-43-9 Evonik Germany 

Precautions for use

Dabco T-16 is a hazardous material and should be handled with care. Always follow the manufacturer's instructions when working with Dabco T-16.

Storage

Store in a cool, dry place. Keep out of reach of children and pets.

Disposal

Dispose in accordance with local, state, and federal regulations.

 

Shelf life:

 Remain unopened for two years

 

Storage and Transportation:

Should be sealed, stored in a dry cool ventilated warehouse

 

Packing:

200KG/ barrel storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent moisture and other substances from mixing and affecting the product performance. Do not inhale dust and avoid contact between skin and mucous membrane. Smoking, eating and drinking are prohibited in the workplace. Shower and change after work. Store contaminated clothes separately and use them after washing. Practice good hygiene.

 

 

Technical support and business contacts E-mail:sales@newtopchem.com