Dimethyltin dilaurate MSDS Safety Data Sheet

2024-06-27 13:32:16news87Read

Chemical Safety Data Sheet (MSDS) is an important document that provides physical and chemical properties, health and safety information of chemicals, aiming to ensure that chemicals are stored , safety during transportation, use and disposal. The following is a summary of the MSDS about dimethyltin dilaurate (chemical formula usually expressed as C32H66O4Sn), focusing on key information such as its hazards, protective measures and emergency response.

1. Chemical identification

Chemical name: Dimethyltin dilaurate
Alias: DBTDL
CAS number: [corresponding number]
Molecular formula: C32H66O4Sn
Molecular weight: about 631.56 g/mol
United Nations Dangerous Goods Number (UN No.): [Specific number, if applicable]
Classification of dangerous goods: According to GHS standards, they may be classified as flammable liquids, skin irritants, serious eye damage/eye irritation, hazardous to the aquatic environment, etc.

2. Ingredients/composition information

Main ingredients: dimethyltin dilaurate, purity ≥98%.
Hazardous ingredients: Dimethyltin dilaurate itself is the main harmful ingredient.

3. Hazard Summary

Flammability: May be flammable and may cause burn hazard when exposed to heat, open flame or oxidants.
Health Hazards: May cause damage to health by inhalation, ingestion, or skin contact, including irritation of the respiratory tract, eyes, and skin, and long-term or repeated exposure may cause organ damage.
Environmental Hazard: Toxic to aquatic life and may cause long-term adverse effects on water bodies.

4. First aid measures

Inhalation: Move quickly to fresh air and keep breathing unobstructed. If breathing is difficult, give oxygen. Get medical attention immediately.
Ingestion: Do not induce vomiting. Drink plenty of water immediately to dilute and seek medical attention as soon as possible.
Skin contact: Take off contaminated clothing immediately and rinse with plenty of running water for at least 15 minutes. If you feel unwell, seek medical treatment.
Eye contact: Rinse immediately with plenty of water for at least 15 minutes, then seek medical advice.

5. Firefighting measures

Fire extinguishing media: Dry powder, carbon dioxide, foam or sand. Do not hit chemicals directly with water.
Special Fire Fighting Precautions: Wear appropriate protective equipment to prevent inhalation of toxic fumes. Isolate areas not affected by the fire to prevent the fire from spreading.

6. Emergency leakage measures

Personal Protection: Wear protective eyewear, protective clothing, chemical-resistant gloves and respiratory protection.
Cleaning method: Avoid direct contact, use sand or other inert materials to absorb it, then place it in a suitable container and dispose of it as hazardous waste.

7. Operation and storage

Operating Precautions: Operate in a well-ventilated environment and avoid inhaling steam or dust. Personal protective measures should be taken when using.
Storage Conditions: Store in a cool, dry, well-ventilated place, away from sources of fire, heat and incompatible substances. Should be stored separately and away from direct sunlight.

8. Exposure controls/personal protection

Respiratory Protection: Wear a self-contained or supplied-air respirator when vapors may be generated.
Eye Protection: Wear chemical safety goggles or face shield.
Skin protection: Wear protective clothing and chemical-resistant gloves.
Hand protection: Use chemical-resistant gloves, such as nitrile rubber gloves.

9. Physical and chemical properties

Appearance and properties: Usually colorless to light yellow transparent liquid.
Melting point: Not specified, generally organotin compounds have lower melting points.
Boiling point: High, difficult to measure because a chemical reaction may occur before decomposition.
Density: approximately 1.09 g/cm³.
Solubility: Soluble in many organic solvents, such as alcohols, ketones, esters, etc.

10. Stability and reactivity

Stability: Relatively stable under normal temperature and pressure, avoid contact with high temperatures, strong acids, strong alkali and strong oxidants.
Substances to avoid: Strong oxidants, strong acids, water.

Note

The above information is a general description, and the specific product MSDS content may vary depending on the manufacturer, purity and usage scenarios. Before actual operation, be sure to review and follow the new version of the MSDS provided by the product supplier to ensure that the operation complies with all applicable laws, regulations and safety standards.

Extended reading:

Non-emissive polyurethane catalyst/Dabco NE1060 catalyst

Dabco NE1060/Non-emissive polyurethane catalyst